We offer height-adjustable engine brackets for the installation of a combustion engine, which can be swiveled by 360 degrees. For a fast exchange of identical engine types we offer engine brackets with linear units and quick release plates.
We offer the following standard engine brackets:
The MS/101 is a compact engine bracket designed to accommodate combustion engines from heavy series or racing engines with strong vibrations and dynamic loads. The low construction height and a large base body achieve maximum stiffness in all directions. The spindle, including the head plate, does not turn during height adjustment but is held in position through an internal track.
The engine bracket MS/102 is designed as a modular kit. It is an engine bracket with a slim design that accommodates mid-sized combustion engines. The basic engine bracket is available in 3 construction sizes. Height adjustment occurs by means of a fine-thread nut, using an adjustable pin wrench DIN 1810 B Ø 80-90. The clamping is done by means of a clamping screw. The spindle, including the head plate, does not turn during height adjustment but is held in place by the adaption parts on the combustion engine to avoid turning.
The MS/104 is a simple, robustly designed engine bracket that accommodates mid-sized combustion engines. Height adjustment occurs by means of a threaded spindle with the aid of an open-end wrench.
The spindle also rotates during height adjustment. The advantage of the MS/104 lies in its large adjustment track.